淘寶官方店     推薦課程     在線工具     聯系方式     關于我們  
 
 

推薦課程   ADS2011   |   HFSS   |   Ansoft Designer   |   MWO2006   |   CST   |   Ansoft全集  

 

臺灣射頻專業課程   |   微波測量操作培訓   |   天線設計   |   Cadence Allegro   |   PADS2007 

精品教程, 讓您最快速提升專業能力, 誠信為本, 合作共贏
 

 

培 訓 教 程 列 表

微波射頻仿真設計培訓
ADS2008、ADS2011
HFSS
Ansoft Designer
AWR Microwave Office
CST
  Anost SIWave
  Anost Maxwell
Anost Q3D
Feko
Zeland IE3D9.2
 
微波測量儀器操作培訓
矢量網絡分析儀
頻譜分析儀
微波信號源
數字示波器
邏輯分析儀
高校視頻課程套裝
臺灣中華大學視頻
射頻經典培訓課程
大陸高校視頻課程
全美一流高校視頻
 
PCB設計軟件培訓
Cadence Allegro
PADS2007
Mentor EN2004
Mentor Exp2005
Mentor WG2004
Mentor DxDesigner
Protel
微波器件設計
微波濾波器設計套裝
微波放大器設計套裝
低噪聲放大器設計套裝
微波振蕩器設計套裝
微帶天線設計套裝
 
購買聯系
     購買聯系
     關于我們
    信譽保證
     官方淘寶店

Ansoft軟件 學習培訓教程全集

                   Ansoft Deisnger 學習培訓教程                           Ansoft HFSS 學習培訓教程
                   Ansoft Maxwell 學習培訓教程                           Ansoft SIWave 學習培訓教程
                   Ansoft Serenade 學習培訓教程                           Ansoft Q3D 學習培訓教程  
 


8
  Ansoft Maxwell學習培訓教程套裝    (¥130)                                                            
我要購買
 
 

Ansoft Maxwell 10 視頻教程一套
Ansoft Maxwell 3D Training Manual 一套
Ansoft Maxwell 3D 入門與提高教程 一套
注:學習套裝里的教程也可以分開單獨購買,下面是套裝中的教程內容簡介和單售價格
 


01.  Maxwell 3D 入門與提高教程 ---- 英文399頁 (¥60)

        Ansoft公司關于 Maxwell 3D 培訓的最新內部原版教程,共十一章600多頁,詳細介紹 Ansoft Maxwell 的使用。主要內容有:
       0. fundmentals                                            3. Data Reporting
             0.1 Ansoft Maxwell Desktop              4. Solve Loop
             0.2 Opening a Design                           5. Examples-Magnetic Force
             0.3 Setting a Model Type                    6. Eddy Current Examples
        1. Parametric Model Creation                   7. Transient Examples
            1.1  Boundary Conditions                     8. Maxwell 3D Overview
            1.2  Exitations                                     
        2.  Analysis Setup  


02. Ansoft Maxwell 10 視頻教程--(¥50)


      Ansoft公司關于 Ansoft Maxwell  的視頻多媒體教程,主要內容有:
                 1. Introduction to Ansoft EM (20minutes)
                 2. Maxwell V10 New Features Presentation (23minutes)
                 3. 3D Transient with Motion (24minutes)
                 4. Magnetostatic - Structural coupled solution (18minutes)
                 5. Eddy Current/Thermal Transient Coupled Solution (21minutes)
                 6. Maxwell 3D Magnetostatic (24minutes)
                 7. Maxwell 3D Transient (16minutes)
                 8. Optimetrics Getting Started: A Parametric Study (13minutes)
 



03. 
Maxwell 3D Training Manual ----英文272頁 (¥30)


內容目錄如下:
               01.  Overview of Maxwell 3D, ePhysics and 3D Modeler
               02.  ModelerTutorial
               03.  3D Material Sources Meshing
               04.  A Multipole Permanent Magnet Problem
               05.  A Quadrupole Mass Spectrometer Problem
               06.  Post Processing
                     等等
 

8  Ansoft SIWave 3.0 學習套裝    (¥90)                                                                我要購買
 


Ansoft SIWave v3.0 英文原版設計實例教程(英文120頁)
Ansoft SIWave 英文原版培訓教程(英文159頁)
 



01.
Ansoft SIWave 3.0 原版設計實例教程-- 英文120頁 (¥50


       Ansoft 公司內部教程,通過五個仿真設計工程實例介紹了Ansoft SIWave的使用,圖文并茂,適于入門者自學,內容簡介如下:
        1.  Board Design Example
        The board design example is intended to show you how to import , simulate, and analyze a 4-layer board structure using SIwave.
        2.  Package Planes Impedance Example
        The example is intended to show you how to simulate Z-parameters on a 4 layer package structure using SIwave.
        3.  Package S-parameters Example
        The example is intended to show you how to simulate S-parameters on a 4 layer package structure using SIwave.
        4.  SSN on PCB Simulation
        The example is intended to show you how to simulate SSN. Two signal nets will be driven and one signal net will be left quiet. We will look at the noise on the quiet signal net and power rail.
        5.  Package on PCB Simulation
        This example shows you how to connect a package onto a PCB for system level simulation.
 



02.
Ansoft SIWave 3.0 英文原版培訓教程 -- 英文159頁 (¥40
 

    1. Board Interface Overview
    2. Trace with Via, Ground Plane with Apertures
    3. Analyzing return currents of a differential pair on a package
    4. Post-Layout analysis of a BGA package
    5. Post-layout analysis of a PCB
 


8  Ansoft Serenade 8.71 學習套裝    (¥120)                                                         我要購買
 

 


Ansoft Serenade8.71安裝光盤一張
Samsung培訓教材一套:Using Ansoft Serenade to Design LNA
臺灣CIC 關于Ansoft  Serenade的培訓教程一套
英文圖書一本:RF/Microwae Circuit Design For Wireless Applications



01.
  Using Ansoft Serenade to Design LNA ---- 英文72頁 (¥10)
 

      This Training  is developed for Samsung Electronics train center。It gives a step-by-step Serenade training matirial  with practical circuit (for the Handset )
 



02.
  臺灣CIC 關于Ansoft  Serenade的培訓教程  ---- 英文185頁 (¥25)
 
臺灣CIC關于Ansoft  Serenade的入門培訓教程,185頁,共分六個部分, 分別為:
            1.  Serenade Harmonica Overview                                             2.  Hierarchical Schematics
            3.  Low noise amplifier Design and Load Pull Simulation 
            4.  Oscillator Design and Large Signal S-parameters                  5.  Single Balanced Mixer Design
            6.  Double Down Conversion Communications Receiver
 


03.
 RF/Microwae Circuit Design For Wireless Applications ----(¥20
 

       關于Ansoft Serenade的培訓教材很少,這本書是學習Ansoft Serenade不錯的參考資料。這本書是Ansoft Corp.的一位工程師編寫的,里面的例子全是Ansoft Serenade設計的。
 


8  Ansoft Q3D 學習套裝    (¥100)                                                                          我要購買

 

 


Ansoft  Q3D Extractor 6.0 入門與提高教程(英文原版)一套
Ansoft  SI2D Extractor 6.0 入門與提高教程(英文原版)一套
 



01.
  Ansoft  Q3D Extractor 6.0 入門與提高教程 —— 英文265頁  (¥60)
 

        Ansoft公司關于 Ansoft Q3D Extractor 6.0  培訓的內部原版教程,共五章265頁,詳細介紹 Ansoft Q3D Extractor 6.0  的使用。主要內容有:
         0.  Fundamentals
              0.1  Ansoft Q3D Extractor Desktop
              0.2  Opening a Design in Q3D Extractor
         1. Parametric Model Creation
              1.1  Boundary Conditions
              1.2  Excitations – Source/Sink
         2.  Analysis Setup
         3.  Data Reporting
              3.1  Reports
              3.2  Matrix Reduction
              3.3  Fields
         4. Solve Loop
              4.1 Mesh Operations
         5. Examples
              5.1  Microstrip Z-Bend Examples
              5.2  Micro Via Examples
              5.3  Segmented Return Path Examples
              5.4  Ball Grid Array (BGA) Examples
              5.5  Board Mount Connector Examples
              5.6  Bond Wires Examples
              5.7  Spiral Inductor Examples
 



02.  Ansoft  SI2D Extractor 6.0 入門與提高教程 —— 英文265頁  (¥45)
 

      Ansoft公司關于 Ansoft SI2D Extractor 6.0  培訓的內部原版教程,共五章216頁,詳細介紹 Ansoft Q3D Extractor 6.0  的使用。主要內容有:
         0.  Fundamentals
              0.1  Design Environment
              0.2  Quick Starte
         1.  Maxwell Control Panel
         2.  SI2D Extractor Exective Command
              2.1  Pre-Processing
              2.2  Solution
              2.3  Post Processing
          3. Examples
              3.1  Coax Examples
              3.2  Over-Etching Examples
              3.3  Bond Wire Examples
              5.4  Crosstalk Examples
              5.5  Coplanar Waveguide Examples
              5.6  Grouded Coplanar Waveguide Examples

 

TOP

 

Copyright © 2006 - 2013   微波EDA網, All Rights Reserved    業務聯系:mweda@163.com